20/40FT CONTAINERS
FREE SHIPPING
Shipping Container Tow Bar · Cypress, Texas
Hitch it.Tow it.
Turn and maneuver a 20' or 40' shipping container with your ¾-ton or 1-ton pickup. The Shipping Container Tow Bar bolts on, drops onto a 2-5/16" ball, and you go — no more wiggling the container around with the forks on your tractor or skid steer.
20/40FTfits both container sizes
2-5/16INstandard ball hitch
¾–1TONtow with your pickup
100%USA steel, Texas welded
Featured — free freight, lower 48
The bolt-on
The bolt-on
tow bar
- Fits both 20' and 40' containers
- Uses a 2-5/16" ball
- Tow with your ¾-ton or 1-ton truck
- Simple bolt-on installation
Questions on your hitch or container? Call (281) 304-1515.
The lineup
Tow bar & wheel kits
One bolt-on tow bar, four wheel-kit bolt patterns, one lifter, one skid-steer mover. Everything welded in Texas from USA steel and tested before it ships.
07 PRODUCTS · FREE FREIGHT ON TOW BAR · UPS GROUND ON KITS
Wheel kits
Put the container on wheels
Bolt a pair of spindle-and-hub assemblies onto the rear corner castings, then tow the whole thing with the tow bar up front. Pick the bolt pattern that matches wheels you already own.
Wheel kits — quick shop
Pick your
Pick your
bolt pattern
Match the pattern to the wheels you already own. Not sure? Call (281) 304-1515.
Why buy a shipping container tow bar / wheels?
If you move it more than once
RELOCATING
Relocating a shipping container on-site.
Shipping Container Wheels are designed to move empty or fully loaded shipping containers a snap. Stop trying to drag your shipping container from point A to point B. Install a set of shipping container wheels to make the job easy.
MOVING
Moving shipping containers in or around warehouses, parking lots or other facilities.
Moving containers around construction and industrial work sites.
INCREASE VALUE
Make your container more valuable.
Using shipping container wheels change the game and make your shipping container more valuable.
Designed and Made in USA
Not cheap
Not cheap
imports.
Texas iron.
These are not cheap shipping container wheels made from 3rd world countries. Every kit is assembled by certified welders in Cypress, Texas, from USA steel — and tested before it ships.
QUALITY
Certified welders. DOT-guided design.All of our shipping container wheel kits are assembled in confidence by our Certified Welders right here in Texas. The shipping container wheels adhere to all DOT Guide lines in their design for engineering. Units are designed so when the weight of the container is on the shipping container wheels, the lug in the keyway is unable to rotate due to flat surfaces making contact.
ENGINEERING
Vertical + diagonal gusseting.All of the shipping container wheel kits we manufacture, and sell are engineered with vertical, and diagonal supports to the lug and the spindle. (Other designs sold online secure their units loosely in the ISO shipping container lugs using hardware bolts and straps not designed for the intended purpose.)
USA STEEL
Built to outlast the container.Our shipping container wheels are designed to last. Made from USA steel.
Designed &
made in USA
made in USA
How to use Shipping Container WheelsAbout one minute
About one minute
per corner
NO SPECIAL TOOLS · WALKING PACE OR LESS
01
Lift the corner
Raise one end of the container with a jack or forklift until the bottom corner casting clears the ground.
02
Insert the lug
Slide the Lug head into the bottom corner casting. Flat surfaces seat against the casting so the unit cannot rotate under load.
03
Tighten & mount wheel
Snug the hardware, mount your wheel on the idler hub, and repeat on the other corner. About one minute per side.
04
Roll it
Lift the opposite end with a light-duty forklift or tractor and roll — walking pace or less.
Video: Effortlessly Move Shipping Containers with Tow Bars and Wheel Kits
Our shipping container wheels provide container transporters an efficient way to pick up and drop off containers with limited damage to the shipping container or the ground surface.
Installation takes about one minute and allows your shipping container to be moved by using a light-duty forklift.
Shipping container wheels allow for a smoother, gentler and quieter process. Instead of dragging a container off or onto a truck or trailer bed, Shipping Container Wheels roll the back edge of the container into position with ease and precision.
One shipping container wheel kit includes 2 End Wheel assemblies come with everything you need.
When using Shipping Container Wheels, move the container at a slow speed, walking pace or less.
SafetyThese units are for non-public road use ONLY. Such as moving containers around a Ranch, Farm, Parking Lot or construction site for example. Operate at Low speeds. (Remember there is no brakes.) Never crawl or put any body part under a lifted container.
Tow bar + wheel kit
The complete system
Tow bar up front.
Tow bar up front.
Wheels in back.
Now you can turn and maneuver your shipping container with your ¾ ton or 1 ton truck. No more wiggling around using the forks on your tractor or skid steer. Just bolt on the shipping container tow bar and go. Add a wheel kit to the rear corner castings and the whole container rolls behind your truck across the ranch, the yard, or the lot.
- Fits both 20' and 40' containers
- Uses a 2-5/16" ball
- Tow with your ¾-ton or 1-ton truck
- Simple bolt-on installation
- FREE freight on the tow bar · UPS Ground included on wheel kits
Skid steer quick attach
Heavy duty · Made in Texas
Skid steer
Skid steer
trailer mover
Our attachments are built tough for contractor and commercial duty use, designed and engineered to handle the weight of Shipping Containers, larger trailers and boats. The skid steer quick attach trailer mover with a 2" receiver and heavy duty 3/8" US steel construction and triple frame design will get the job done.
- 2" receiver
- Heavy duty 3/8" US steel construction
- Triple frame design
- Proudly Made In TEXAS
FAQStraight
Straight
answers
If you have more questions use the form below to send your question to us. Thank you!
How does it work?
These shipping container wheel kits are your fastest and easiest solution by quickly installing an Idler Hub Spindle into the bottom corner of a shipping container. Just insert the Lug head into the bottom corner of the shipping container. These units are secured tightly and unable to rotate or become disconnected while in use yet can be disassembled quickly. Now, you can lift one end of your shipping container and roll it to any location you desire.
Can these wheels be used on public roads?
The shipping container wheel kits are for non-public road use ONLY. Such as moving containers around a parking lot, farm, or construction site are just a few example. Operate at Low speeds. (They DO NOT contain a braking system.) We've tested our container wheel kits throughout the country moving containers throughout rough terrain, gravel parking lots, sandy soil and forests.
Can you make custom container wheels?
Yes, we can also make custom container wheel kits for any application.
Do the kits include wheels and tires?
No. Each wheel kit includes 2 spindle + idler hub assemblies with hardware. You supply the wheels and tires that match the bolt pattern you order — 5 × 4.5, 5 × 5.5, 6 × 5.5 or 8 × 6.5.
How fast can I install a set?
Installation takes about one minute per corner. Lift the end of the container, insert the Lug head into the bottom corner casting, tighten, and mount your wheel.
Have a question?Talk to the
Talk to the
shop
- Call us directly
- (281) 304-1515
- Address
- 16411 Dundee Rd
Cypress, TX 77429